Is EasyShed Worth It for Australian Homes and Farms?
This independent easyshed review (also searched as “easy shed review”) is for time-poor Australian homeowners, tradies and property investors who want a durable, council-approved shed or garage without budget blowouts. We benchmark EasyShed against custom steel builders and other DIY shed kits on materials, wind ratings, pricing, and approval complexity.
What Is EasyShed—and Who Is It Best For?
EasyShed is a well-known Australian shed kit brand supplying flat-pack garden sheds, workshops, garages and small rural structures in Colorbond and Zincalume finishes. Kits are designed for DIY assembly or local installer fit-off. Compared with custom-built steel sheds from local fabricators, EasyShed focuses on:
- Cost-effective DIY shed kits for suburban blocks, courtyards and small workshops
- Fast delivery windows and standardised sizes
- A wide Colorbond palette and accessories (skylights, windows, flooring, anchors)
Where custom steel builders shine is larger spans (farm machinery storage, rural sheds NSW), engineered carports, and bespoke designs like custom Colorbond garages Perth or industrial sheds in regional areas. If you need a basic garden shed, compact garage, or workshop shed in a metro area, EasyShed is usually excellent value. For wide-bay barns or cyclone-exposed sites, you’ll often step up to heavier framing and project engineering.
How Durable Are EasyShed Products in Australian Conditions?
Durability comes down to steel type, protective coatings, fasteners, and correct wind classification per AS/NZS 1170.2. EasyShed offers Colorbond and Zincalume options, typically using high-tensile, coated steel suitable for most non-cyclonic suburbs. For coastal, high-wind, or cyclonic regions, check model-specific engineering before purchase and consider upgrades to:
- Higher wind-rating tie-downs and bracketry
- Heavier base rails and portal members for larger garages
- Stainless or class 4 fasteners in marine environments
- Insulated roof/wall panels to reduce heat load
In coastal WA and QLD, marine exposure accelerates corrosion. Choose Colorbond steel closer to surf and salt spray, specify adequate set-back from the shore, and wash-down surfaces periodically.
How to Spec Wind-Rated Sheds for Cyclonic Areas in QLD
- Confirm your site’s wind region (B, C or D) and terrain category with your engineer or council (AS/NZS 1170.2).
- Ask for engineering for “wind-rated sheds for cyclonic areas,” including tie-down schedule and slab/thickening details.
- Use screw anchors or cast-in hold-downs per the engineer’s N-value, not generic masonry anchors.
- Upgrade doors and roller shutters to wind-locked models to avoid internal pressurisation.
- Obtain a Form 15/126 (or state equivalent) and keep it for final inspection.
What Are the Best Shed Materials for Perth’s Climate?
Perth’s hot summers, high UV, and afternoon sea breeze favour pale Colorbond roofs/walls with higher solar reflectance. Zincalume performs well inland but can spot-stain near salt. Use sarking/insulation to manage radiant heat.
Colorbond vs Zincalume — Which Is Better for WA Conditions?
| Factor | Colorbond Steel | Zincalume Steel |
|---|---|---|
| Coastal resistance (sea breeze, salt) | Better in suburban coastal zones when regularly washed | Can mark near coast; best inland/regional use |
| Heat & UV performance | Light colours reflect more heat; good UV stability | High reflectivity initially; can dull over time |
| Colour range | Extensive Colorbond palette (matches homes) | Metallic silver only |
| Price (like-for-like) | Usually a premium | Generally cheaper |
| Aesthetics | Premium architectural finish | Industrial look |
| Maintenance | Low; periodic wash-down | Low; avoid contact with reactive materials |
WA tip: For steel sheds Perth, choose light Colorbond (Surfmist, Shale Grey) and add roof sarking or insulated panels to reduce radiant heat transfer.
Pro Tip: Did you know using insulated roof panels can reduce internal shed temperatures by up to 10°C in summer? Pair with ridge ventilation for best results.
How Does Pricing Compare in 2025?
Based on current industry guides and supplier pricing, here are indicative ranges for metro areas (slab not included):
- Small garden sheds (DIY kits): $400–$1,800
- Workshop sheds up to ~3.0 × 3.0 m: $1,200–$3,500
- Single garages: $3,500–$8,500
- Double garages: $6,500–$14,000+
Concrete slabs add ~$120–$180/m² in metro markets, higher with thickening for heavy tie-downs. Custom-built rural sheds and farm sheds Victoria with larger spans can exceed $30,000 once engineering, earthworks and doors are included. According to the 2025 HIA Outdoor Structures and Home Improvement outlook, steel input prices stabilised after 2022–2023 volatility, but labour remains tight in capital cities.
DIY Shed Kit vs Custom-Built: Which Suits You?
- Choose a DIY kit if you want fast delivery, standard sizes, and the lowest cost per square metre for storage or a small workshop.
- Choose custom-built if you need wide bays, mezzanine loads, custom carports Melbourne, or specific cladding profiles to match your home.
- For council-approved sheds WA and SA, custom engineering may speed approvals when your site is constrained or wind exposure is complex.
What Sizes and Configurations Are Available?
EasyShed’s catalogue covers compact yard storage through to small garages with roller doors. Typical configurations include:
- Garden sheds with sliding or hinged doors for courtyard storage
- Workshop sheds Adelaide style with windows, skylights and workbenches
- Single and double garages with roller doors (check wind-lock options)
- Low-height carports for affordable carports for Australian homes
Need bigger? For barn-style rural sheds NSW, American barns, or farm machinery storage, consider a custom fabricator with portal frames engineered to your wind region and site terrain.
Will It Meet Australian Standards and NCC Requirements?
- Wind actions: AS/NZS 1170.2
- Steel structures: AS 4100 (and cold-formed steel AS/NZS 4600)
- Fasteners and durability: AS 3566
- Sheet and wall cladding: AS 1562 series
- National Construction Code (NCC 2025): Class 10a compliance and site drainage
Ask for site-specific engineering and a certification letter for the exact model, wind region and terrain. Keep documentation for inspections and insurance.
How to Get Council Approval for Your Custom Shed in WA
Step-by-Step for Perth and Regional WA
- Check zoning and setbacks in your Local Planning Scheme (front/side setbacks, maximum heights).
- Confirm wind region (Perth metro is typically Region A) and exposure category.
- Prepare plans: site plan, elevations, slab and tie-down engineering, drainage. Most councils require stormwater management.
- Lodge building permit (Class 10a) with owner consent, BA forms, and engineering certificates.
- Book inspections (footings/slab if applicable, final). Keep invoices and certificates.
Tip: If you’re near the coast, specify marine-grade fasteners and wash-down zones to satisfy durability expectations.
Case Studies: Real-World Builds Across Australia
Custom-Built Double Garage in Perth
6.0 × 6.0 m Colorbond, light roof, insulated panel upgrade, vermin flashing. Designed to Region A with high-edge exposure. Result: Cooler workspace and a tidy match to the home facade.
Cyclone-Rated Farm Shed in QLD
12.0 × 7.5 m machinery bay, engineered to Region C with wind-locked roller doors, cast-in hold-downs and enclosed gable ends. Lesson: Doors and tie-downs are critical for cyclone-rated sheds QLD.
Custom Carport in Melbourne
Double-bay skillion roof, powder-coated posts, matching Colorbond cladding. Local planning approval for front setback achieved with sympathetic design notes — a common win for custom carports Melbourne.
FAQs: Your Top EasyShed Questions Answered
Are EasyShed kits made from Colorbond steel?
Most ranges can be ordered in Colorbond or Zincalume. Confirm the exact grade and warranty for your chosen model and finish.
Are EasyShed products Australian-made?
EasyShed is an Australian brand with local manufacturing for many lines. Always verify origin for the specific kit you order if this matters for your project.
What’s the lead time and delivery cost?
Common sizes often ship quickly; custom colours or door options may extend lead time. Metro delivery is usually economical; regional/remote areas cost more.
Do I need a slab?
Small sheds can go on pavers or a rebated floor system; garages and larger workshops should be on an engineered slab with thickened edges and compliant tie-downs.
Can I DIY the install?
Yes for most small/medium kits if you’re handy and have two people. Engage a licensed installer for larger spans, wind-prone sites, or when time is tight. For a step‑by‑step walkthrough of slab prep, fixings and assembly, see our garden shed installation guide.
How do EasyShed kits compare to custom steel sheds?
Kits are cost-effective and quick for standard sizes. Custom builders suit oversized spans, complex sites, premium doors/windows, and tailored facade outcomes.
Will a kit meet my council’s requirements?
Yes, if you submit the correct engineering and plans. Some councils in WA, QLD and NSW require site-specific certification. Seek “council-approved sheds WA” documentation when ordering.
Can I add insulation and power?
Yes. Use shed-safe insulated panels or bulk insulation with sarking; run electrical via a licensed electrician with underground conduit and RCD protection.
5-Step Buying Guide for Custom Sheds in Australia
- Define use-case: garden storage, workshop, farm machinery storage, or garage.
- Pick material/finish: Colorbond vs Zincalume comparison; consider coastal exposure.
- Check wind region and terrain: choose standard kit for Region A/B or upgrade to engineered, cyclone-ready package for C/D.
- Plan foundations: slab thickness, edge beams, and anchor type per engineering.
- Prepare approvals: site plan, elevations, engineering certificates; book inspections early.
When you’re ready to build, follow this garden shed installation checklist to avoid common slab and tie‑down mistakes.
Verdict: Who Should Choose EasyShed (and Who Shouldn’t)?
If you want an affordable, fast, and tidy storage or workshop solution — especially in metro, non-cyclonic suburbs — EasyShed is a solid buy. Opt for Colorbond in coastal WA/QLD, add insulation, and confirm wind rating. If you’re building large-span rural sheds, complex custom Colorbond garages Perth, or cyclone-exposed structures, a custom engineered solution from a local steel builder may be the better path.
Either way, insist on site-specific engineering, council compliance, and a foundation-and-tie-down plan that matches your wind classification.
Helpful Resources and References
- Housing Industry Association (industry insights, permits)
- Bureau of Meteorology climate data and wind info
- Standards Australia (AS/NZS 1170.2 wind actions overview)
- Australian Steel Institute (steel durability guidance)
- CSIRO materials and corrosion research
- Energy.gov.au on insulation and building envelope comfort
Market context: “2025 Australian Steel Market Outlook” and “2025 HIA Outdoor Structures and Home Improvement Report” indicate stable steel supply but elevated labour costs in capital cities compared with 2021–2023.
Keyword Clusters Covered
steel sheds Perth, custom Colorbond garages Perth, council-approved sheds WA, cyclone-rated sheds QLD, rural sheds NSW, farm sheds Victoria, custom carports Melbourne, workshop sheds Adelaide, industrial sheds Tasmania, Colorbond vs Zincalume comparison, wind-rated sheds for cyclonic areas, DIY shed kits, garage kits Brisbane, affordable carports for Australian homes, shed slab cost, gable vs skillion roof, Perth heat resistance, regional corrosion, building code compliance.