How Much Do Farm Shed Kits Cost in Australia?

Below are typical 2025 kit-only prices (GST incl.) for cold-formed steel rural farm sheds using Zincalume or COLORBOND steel cladding. Installed costs vary by site, slab, wind rating, and access.

• Small implement sheds (approx. 6 m x 4 m x 2.7 m): $4,500–$9,900
• Medium farm buildings/workshop sheds (9 m x 6 m x 3.0 m): $8,500–$16,500
• Large farm sheds (12 m x 9 m x 3.6–4.2 m): $18,000–$35,000
• Machine shed prices (15–18 m spans, 4.5–6.0 m eave): $32,000–$85,000
• Extra-large hay sheds (3-sided, 18–24 m spans): $42,000–$110,000
• Custom Colorbond garages (double to triple, rural spec): $9,900–$29,000

Add-ons that affect price: COLORBOND vs Zincalume, heavier wind regions (N3/N4 or cyclonic C1–C3), snow loads (alpine/TAS), roller doors vs open bays, eave height, and hot-dipped galvanized columns or universal beam (UB) portal frames on very large sheds.

Installed price guide: Allow an extra 30–60% for footings, slab, erection, craneage, and electrical fit-out (varies by region and site class). Concrete slabs (100–125 mm with mesh) commonly run $90–$150 per m² depending on finish, thickenings, and regional rates.

What Drives Farm Shed Prices?

• Wind region and terrain category (AS/NZS 1170.2 wind actions)
• Roof type: gable vs skillion; pitch 5–15° often optimises water run-off and headroom
• Bay spacing (typically 3–6 m) and portal frame type
• Eave height and clear opening height for farm machinery storage
• Cladding: Colorbond vs Zincalume comparison
• Doors: open bays vs sliding vs roller doors (manual or motorised)
• Corrosion environment (coastal C3–C4; farm chemicals; dairy effluent)
• Insulation, roof ventilation, skylights, vermin flashings, gutters and downpipes

What Are the Best Shed Materials for Perth’s Climate?

Perth and regional WA face high UV, heat, and coastal corrosion. COLORBOND steel in coastal-grade specifications and adequate ventilation generally outlasts cheaper alternatives near the coast. Inland Wheatbelt properties can consider Zincalume for value, with COLORBOND trims for aesthetics.

Colorbond vs Zincalume — Which Is Better for WA Conditions?

Pro Tip: Did you know using insulated roof panels can reduce internal shed temperatures by up to 10°C in summer? Combine light COLORBOND colours, sarking, and ridge/whirly ventilation for cooler workshops.

Farm sheds come in several configurations suited to rural needs. If you’re considering a more traditional American look, you may want to explore Barn Sheds Australia for prices, council approvals, and material comparisons.

DIY Kit vs Custom-Built Rural Sheds — Which Suits You?

Alternatively, buyers on a tighter budget can consider Second Hand Sheds for Sale for affordable used steel structures.

2025 Price Snapshots by State

These kit-only ranges assume standard inclusions (engineering, cladding, fixings). Site specifics can shift prices up or down.

WA — steel sheds Perth and regional WA

• 9 x 6 m workshop: $9,500–$17,500 (N2/N3). Coastal upgrades add 5–12%.
• 12 x 9 m machinery bay: $19,000–$36,000. Taller eaves for headers add 8–15%.
• 18 x 12 m hay shed (3-sided): $45,000–$90,000. Added 2024 WA wind-rating compliance notes

NSW — rural sheds NSW and farm sheds for sale Sydney (outer metro/regional)

• 6 x 4 m implement: $4,800–$9,900
• 12 x 9 m farm shed: $18,500–$34,500
• Open-bay hay sheds: $40,000–$85,000 (terrain categories 1–3)

For Central West NSW installs, explore Carports Orange (custom designs) and on-site build options.

VIC — farm sheds Victoria and farm shed prices Victoria

• 9 x 6 m workshop: $9,000–$16,000
• 12 x 12 m machinery storage: $27,000–$55,000
• Alpine/snow load upgrades may add 8–20% to frames and purlins

QLD — cyclone-rated sheds QLD (C1–C3)

• 9 x 6 m (C1–C2): $11,500–$21,000
• 12 x 9 m (C2–C3): $24,000–$48,000
• Open bays often require upgraded hold-downs and door bracing

TAS — sheds Tasmania price list (indicative)

• 6 x 4 m implement: $4,800–$9,500
• 12 x 9 m farm shed: $18,000–$33,000
• Snow/wind combinations can add 5–18% depending on site exposure

SA

• 9 x 6 m workshop: $8,800–$15,500
• 15 x 9 m machinery: $28,000–$59,000
• Coastal Yorke/Lower Eyre: consider COLORBOND coastal specs

Wind Ratings, Engineering and Council Approvals

Quality rural sheds for sale should include site-specific engineering to Australian Standards and National Construction Code (NCC) requirements.

• AS/NZS 1170.2: Wind actions
• AS/NZS 4600: Cold-formed steel structures
• AS 4100: Steel structures (for UB portal frames)
• NCC (BCA) Volume Two: Class 10a buildings

How to Get Council Approval for Your Custom Shed in WA

1. Confirm zoning and setbacks with your local Shire planning team.
2. Order engineered drawings and a site-specific wind report (Region A, B or C; terrain category).
3. Lodge a Building Permit application (BA1/BA2) with certificates of design compliance.
4. Document stormwater disposal, bushfire (BAL) if applicable, and on-site wastewater clearances.
5. Book mandatory inspections (footings/slab, completion). WA tip: Council-approved sheds WA often require evidence of tie-down and slab detailing that matches the certified drawings.

QLD Cyclonic and Coastal Conditions

For cyclone-rated sheds QLD (C1–C3), expect closer purlin spacing, heavier brackets, and stricter door wind locks. Engineer to AS/NZS 1170.2 and verify terrain/shelter from nearby buildings.

TAS and Alpine Areas

Combine wind and snow actions. Roof pitch and purlin sizing are critical; consider higher pitch and heavier rafters to reduce drift and ponding risk.

Which Roof Style Is Best: Gable or Skillion?

• Gable: Classic look, efficient spans, easier guttering; ideal for large farm sheds.
• Skillion: Lower height one side; great for open-front hay sheds or lean-tos; can be cheaper for small footprints.

5-Step Buying Guide for Custom Sheds in Australia

1. Define use and clearance: List biggest machinery (cab height with GPS domes), hay bale sizes, and door/wall heights needed.
2. Get the wind/snow facts: Request site-specific wind region, terrain category, and if applicable, snow loads.
3. Choose cladding wisely: Do a Colorbond vs Zincalume comparison for your corrosion environment and budget.
4. Nail the openings: Decide open bays vs sliding vs roller doors. Add vermin flashings and wind locks where required.
5. Demand itemised quotes: Ensure engineering, hold-downs, gutters, fixings, delivery, and lead-times are clearly listed.

Popular Use-Cases and Configurations

• Farm machinery storage with 6 m bays, 4.5–6.0 m eaves, open-front design
• Hay sheds (3-sided) with skillion roof and heavy-duty posts
• Workshop sheds with insulated roof, skylights, and 3-phase provision
• Custom Colorbond garages Perth and affordable carports for Australian homes
• Cattle yard covers and rural sheds for sale with UB portal frames for long spans

For those focused on crop or hay storage, the Hay Shed Prices, Kits and Design in Australia (2025) guide covers capacity planning and materials.

Recent Build Examples

Wheatbelt WA Machinery Shed (18 m x 12 m, 5.0 m eave)

• Spec: Gable, 3 x 6 m bays, open-front, Zincalume roof/walls, COLORBOND trims
• Engineering: Region A, N3, TC2; screw piles due to reactive clay
• Kit price: mid-$60k; Installed: mid-$90k after slab, erection, electrical

Outer Sydney Rural Workshop (12 m x 9 m, 3.6 m eave)

• Spec: Enclosed with two 4.5 m roller doors, insulation, whirlybirds
• Engineering: N2 with shielding; conventional pad footings
• Kit price: high-$20k; Installed: low-$50k including slab and power pre-wire

TAS Implement Shed (9 m x 6 m, 3.0 m eave)

• Spec: Skillion roof, open-front, Zincalume cladding, snow load allowance
• Kit price: around $12k; Installed: around $20k subject to site

FAQs on Farm Shed Kit Prices

What’s included in a farm shed kit?

Engineering drawings, frames, purlins/girts, cladding, flashings, gutters/downpipes, fixings, and door hardware as specified. Slab, footings, erection, and electrical are usually excluded unless quoted.

How long do kits take to arrive?

Typically 3–8 weeks depending on season, colour selection, and region (allow longer during peak harvest build windows).

Do I need council approval?

Most Class 10a rural sheds require a building permit. Planning approval depends on zoning, size, and setbacks. Seek “council-approved sheds WA/NSW/VIC/QLD” guidance early.

Will a cyclonic rating increase cost?

Yes. Cyclone-rated sheds (QLD/WA north) require heavier members, closer spacings, stronger door systems, and upgraded hold-downs.

Colorbond vs Zincalume — which lasts longer?

Both are durable when detailed correctly. Near the coast or in harsh agricultural environments, COLORBOND in appropriate grade often outperforms Zincalume.

Compliance and Quality Checks

• Ask for a site-specific wind/snow certificate and connection details that match your plan.
• Confirm steel grades and coating specifications for your corrosion category.
• Match door sizes and opening heights to machinery with a safety margin.
• Ensure gutter capacity, stormwater discharge, and overflow paths are documented.
• Note: 2024–2025 updates to AS/NZS 1170.2 interpretations in some councils have tightened wind pressure checks on wide roller doors.

Helpful Australian Resources

• Housing Industry Association (HIA) — outdoor structures trends and compliance tips
• Master Builders Australia — licencing and contracts
• Bureau of Meteorology — wind region maps and climate data
• Australian Steel Institute — steel design and durability guidance
• Energy.gov.au — insulation and heat-mitigation guidance

Cited insights reflect current Australian Standards (AS/NZS), the 2025 HIA Outdoor Structures and Home Improvement outlooks, and the 2025 Australian Steel Market Outlook for material and supply considerations.

Get an Itemised Quote

Ready to price your farm shed? Share your site wind region, terrain category, eave height, bay spacing, and door schedule. Ask for line-by-line pricing on engineering, kit, delivery, slab, erection, and options like insulation or skylights. You’ll quickly see where to invest and where to save.